For entertainment, work or study, we use several electronic devices daily. Almost every of our gadget has its own wire. Typically, the wires are stored on the table or in the working area in a messy state and are often confused. And, more worse, sometimes we lose them.
"Take and do" offers you an alternative method of storing wires in an organized form so that they do not confuse. So they will always be in sight and you can always find the desired cable as soon as you need it.
1. Move order with magnets
- Remove the springs from old mechanical handles.
- Put the spring at the cable connecting end.
- Apply glue to one or more magnets.
- Stick them to the edge of the desktop.
- Place the wires by pulling them into magnets.
2. Use toilet paper bushings
- Fold the wire.
- Put it into an empty sleeve.
- Stitch each sleeve.
3. Keep the wires in a plastic bottle
- Cut the plastic bottle along the sights, leaving the bottom of the bottom untouched.
- Open the bottle.
- Put inward one or more pre-sweepable wires.
- Tighten the bottle cover.
4. Mark them using color scotch
- Use multicolored tape to mark the ends of the wires.
- When you need to connect a specific cable, you can quickly find it using marking.
5. Use the paper clamp metal
Option number 1.
- Place a couple of small magnets on the edge of the clamp.
- Clamp them with a tape.
- Attach the clamps to the edge of the table and hang one wire on each magnet.
Option 2.
- Attach the clips to the surface.
- Insert the ends of the cables in the clips loop. So the wires are not confused and will be conveniently fixed in one place.
Option 3.
- Swim wires separately.
- Each motility lock the clip.
6. Keep them on clothespins
Option number 1.
- Apply glue on one side of the clothespins.
- Slit 2 clothespins with each other different ends.
- One of the clothespins hold the end of the wire.
- The remaining part of the wire is shown diagonally on glued clothespins.
- The opposite end of the wire is hosted by another clothespin.
Option 2.
- Swim each wire and fix it with the clothespin.
- Write on each cluster the destination of the wire. So you can store wires in a box or drawer of the table and quickly choose the name you need.
