Loft or industrial style has recently appeared, but it has already been firmly settled in interior design, including houses and apartments. Below is its features on the example of the door handle.
Need
We will produce it from the reinforcement of the periodic profile and two segments of the steel strip of different widths.- Scrolls;
- Bulgarian and drill;
- semi-automatic svara (MIG);
- Metal file;
- marker and measuring instrument;
- aerosol paint, etc.
Manufacturing process
The ends of the fittings squeezed into the cloth are bending at right angles using a pipe cut.
Superior cut off with a grinder. By control the corners of the fold, the arrangement of the ends in one plane and the rectinence of the longitudinal protrusion on the reinforcement along the entire length. Otherwise, the quality and appearance of the product will suffer.
We place a narrow steel strip, taking into account the sizes of the bracket and cut off the segment required along the length.
Step the grinder of corners under 45 degrees.
We symmetrically set on the strip of the bracket, we note the centers of its "legs", we carry out, drill two through holes in diameter slightly less than the diameter of the bracket.
On the "legs" grop with a bracket, put up the strip so that the centers of the holes coincide with the "legs" centers. Observing the center, we weld the part among themselves.
We are lacing a wide band contracted narrow and cut the desired length. We are placing the welding places of a wide band to a narrow strictly under the "legs" of the brackets and even in the middle, we turn them, drill and cut the corners under 45 degrees.
On a wide band, symmetrically lay the narrow with the screw, fix their clamps, through the holes weld them between themselves. All sliced faces and welding places are cleaned with a file and a grinder.
In the corners of a large strip symmetrically drill four holes for mounting the handle to the door of the door.
Okrew the product with sandpaper, wipe the napkin and paint the paint from the aerosol can.
After drying the paint, the handle can be installed on the door.
