The assortment of the finished street furniture of the budget segment in stores rarely can please something really worthy. If you do not want to install a plastic table on your terrace, then this master class is for you. You can make a beautiful table on it, and very cheap.
Materials:
- foam sheet;
- cement;
- sand;
- water;
- Wood pallet;
- paint.
The process of making a coffee table
This is a really unusual table, since in it the standard legs will replace a pair of concrete swans. Make them very simple. You need to draw one swan on paper in full size, and cut it. It is important that the bending of the neck of the bird and the top edge of its tail were at one height. The resulting pattern will be burned on a sheet of foam 2 times. Then swans are cut. The remaining sheet of foam will be applied as a formwork for concrete.
The sheet is placed on a polyethylene film and pressed bricks. Then concrete floodbing.
It can be bought in bags, or mix the cement with sand in the ratio of 1: 2. It is advisable to add fibrovolok. Thin formwork details will pop up, they need to press with bricks.
In addition to the table there is a concrete flower pot. For its manufacture, it is necessary to choose a bucket of suitable volume and fall asleep it outside with wet sand.
The bucket is removed, and the circumference of the shape is divided into 5 sectors. Next, you need to cut the sand by the sewer pipe at an angle to expand the shape, and make it curly. It must be cleaned from the inside, and to smooth the walls.
Inside the sandy shape poured liquid concrete about half. Then in it is immersed with weighty water of the bank, a smaller bucket or another capacity to create a cavity for planting the plant.
To make a pallet under a flower pot, you need to catch a wet sand into a plate or a suitable sized pelvis. Then the form turns over, and the tight sand is cooked from above concrete.
A few days later, you can remove swans from foam.
A formwork is created from the subframe materials under the sole of the table, into which concrete is poured. Then it is inserted into it and vertically swans are aligned.
After drying the concrete, you need to paint swans with a sole, as well as a pot and stand under it. You can immediately land and plant.
It remains only to establish a base, and cover it with a tabletop, which is chisced from a wooden pallet. Pot is better to put on the table. He will fit the worktop, which will prevent her tipping, as it is not attached.
Watch the video
You will not believe how cool the thing can be made from bottles and cement - https://sdelaysam-svoimirukami.ru/6557-vy-ne-poverite-naskolko-krutuju-vesch-mozhno-sdelat-iz-butylok-i-cementa.html