You can buy an expensive organizer container tool for storing tools, but it's hard to wear it. What would make a capacity not only for storage, but also transportation from place to place?
Need
- wheels for carts;
- rolling bearings;
- furniture shield;
- hairpin;
- hardware;
- Edge cord, etc.
- Need tools: Bulgarian, drill, welding, milling cutter, wrench, circular, etc.
The process of manufacturing a drum tube
Clean the barrel from stickers and old paint.
By placing, cut out the opening.
To the bottom of Krepim 4 wheels with bolts and nuts.
In the center of one drill hole under the heel.
Cut three circles from the furniture shield. In the center of one make a hole under the heel.
From the square profile, cut 8 equal segments. In one wall, drill two holes, and the opposite silent.
In a pipe with a diameter of 30 mm, we will press 2 bearing. To her at the level of the ends, crucifably weld one under the other P-profiles.
Two plates weld to one 8 pressed to each other elements of a square profile, to the other - 10 fragments of the C-shaped profile.
From the furniture shield, cut out 4 equal rectangles. We screw in the top of the screws, and in the middle across the plates with the profiles.
We insert the plates into the guides and fix the screws. One circle of the shield is cut into 4 equal parts and one are placed down on the edges of the guides by fixing to vertical plates.
To the outer edge of the quarter, fasten the steel plate, bent along the radius, and fasten it with screws. Dysyshko divide into two segments of Bru.
The stilette is made through the hole in the circle of the shield, mocked by washers. We wear a pipe with bearings and check the ease of rotation.
We insert the assembled node in the opening of the barrels and fasten the hairpin outside the lid.
Checking the horizontal, fix the circle to the sidewall barrels.
One of the circles put on the bottom, and the second is fixed in an intermediate position horizontally to the sidewall of the barrels.
Doors secure loops to the way, install latches and handles.
The edges of the opening and the door are closing the protective cord.
From above, you store keys, screwdrivers, pliers, etc. Two segments on the bottom are needed under hardware, the middle - under the drill, the grinder and other power tools, the bottom - for welding, cable, etc. The cabinet is easily rolled out of place in place.
