When designing the tile surface, it is surprising how technically and aesthetically affects the final result, it would seem, even the shortest element of the junction. This is especially well noticeable on mosaic surfaces, the final form of which can have a completely different aesthetic effect, depending on the material selected for the grout. The Top-10 of the best rates for the grout plates - prevent damage to the decorative layer. It counteracts the negative impact of moisture, dirt, fungus formation. There are four main types of grouts, each of which is characterized by its chemical composition and consistency.
%%% Rating_aRea %%% Cement Solution Solution consists of a mixture of water, cement and mineral fillers. Special emulsions can also be added to the solution of mechanical damage, humidity and abrasion into the solution. It looks well on the walls and sexes in the kitchens and bathrooms. The coarse grout is also suitable for facade and terass tiles. Cement grout is sold in a dry form, in bags and buckets, and is suitable for filling the gaps width not more than 15 mm. After kneading the cement mortar, it retains its properties within 2 hours, after this time, the mass begins to push. Mass are applied with a rubber spatula or grater. Drainity of classical cement grout is an elastic cement solution. It adds polymer modifiers and various pigments that improve its characteristics. Therefore, elastic cement grouts have a wider range of applications, they are more resistant to abrasion and forming fungal organisms. Separating a cement solution for grouting is recommended to buy those that include special hydrophobic additives, since they are responsible for reducing water absorption and susceptibility to pollution. Thanks to these properties, the grout preserves its homogeneous color longer. Sopro DF 10 elastic cement-based grip. Great for minor and medium sized seams. It works with almost any types of ceramic cladding, stone and concrete panels, glass mosaic, etc. Does not leave lime deposits on the surface and provides a resistant solution color. It is used only in the room and should not be exposed to water and various cleaning substances, especially acid-containing.
The advantage of OPZ provides persistent grouting; high-quality protection against mold and microorganisms; high resistance to pollution. Minus low resistance to cacial materials.3. KNAUF FUGENBUNTAntly selected mixture of cement, mineral fillers and various modifiers for indoor and outdoor use. It is used as a grout for wall and floor tiles, as well as on surfaces with elevated temperature fluctuations (heated floors, terraces, balconies). The cost of 120 rubles.
Plusiness to form fungus, mold and algae; waterproof; frost resistance; high adhesion to the tile. Minus is perdicable only for grouting seams weakly absorbing or inevitable ceramic tile.2. Mapei Ultracolor Plus High-quality Sutroacolor Plus Suture Filler provides a dense connection of materials used to cover floors and walls. It is resistant to low temperatures, moisture and sunlight, therefore it is great for grouting outdoor surfaces, such as facades or balconies. It can be used to fill out porcelain stoneware, clinker, glass mosaic, terracotta, marble, granite or artificial stone. Provides deep and homogeneous color. Thanks to Bioblock technology on the surface of the seam, fungi and mold do not develop. Special hydrophobic supplements make it ideal for applying on the seams on the balconies, in the bathrooms and in the kitchens - water particles and dirt are not absorbed into its structure.
Plusantigribkind impregnation; rich and persistent colors; hydrophobicity; 43 colors to choose from. Minusane detected.1. Ceresit CE 40Elastic waterproof grout, designed to fill glass, ceramics, porcelain, as well as stone (including marble) tiles on a vertical and horizontal surface. Formula "Favorle", due to the collaboration of three active substances, provides long and efficient protection against fungus. and mold. The technology protects both the seam itself and the adjacent surfaces of the tile (inhibition zone), providing aesthetic appearance of ceramic facing. And thanks to a special aquastatic effect - hydrophobization, water drops remain on the surface of the joint, which significantly slows down the spread of mold.
Plis-fiber anti-grapple protection; water-repellent effect; durability; protection against contamination. Cell price tag.ceresit CE 40
Silicone grouting grouts are distinguished by high water resistance, plasticity, immunity to any chemistry and temperature change. They act as excellent surface sealant and are ideal for ceramic tiles, especially in hard-to-reach places, for example, in the corners or narrow gaps on the stairs. But at the same time they are not afraid of open air. In stores are sold already in the finished form, in a special hermetic packaging (cartridge), from which they are applied directly to the surface.2. Sika SanisIlOther Silicone Sealant, resistant to savory, with long-term resistance to fungi and mold. Universal, waterproof, practically no smell. Suitable for wet premises, (toilets, bathrooms, kitchens, laundry). The cost of 265 rubles.
Volg-long resistance to fungi and mold; good adhesion to most non-porous bases; high resistance to UV radiation and weather conditions. Minus-a-dwyled consistency. Ceresit CS 25Silicone Ceresit CS 25 grout contains fungicidal substances that block the growth of fungi and mold in three ways: they block ways of formation of new fungal disputes, suppress the growth of existing ones and suppress their distribution. The long-term effect is ensured by permanent interaction of active substances. Timka is used to fill the seams between the ceramic tiles, provides a dense connection in places of cracking of conventional welds, suitable for sealing seams in wet rooms. Can be used in bathrooms, kitchens, toilets, shower and outdoors. At the same time, the material is perfectly kept on dry, poorly absorbing surfaces, such as glass, glazed ceramic tiles, porcelain, faience, etc.
The advantage of fungicides, which has high resistance to the appearance of mold; provides a dense connection in places of cracks of conventional welds; waterproof; high adhesion to dry substrates with low absorbable ability, such as glass, glazed ceramic tiles, porcelain, faience and enamel elements. Minusna detected.ceresit CS 25
Epoxy solution of epoxy grouts consist of three components: epoxy resin, mixed hardener and quartz sand. Epoxy solution is much stronger than cement and has the best technical characteristics. They differ exceptional resistance to chemical and mechanical damage, acid resistant, waterproof, resistant to high temperatures, and also have high plasticity, which expands the area of their application. The material category has excellent mechanical strength and Good adhesion to any reasons. They can be used even in saunas and pools, since they do not enter the chemical reaction with chemicals, have low porosity and do not absorb water vapor. Epoxy grouts are sold in buckets and require stirring. Applied with a toothed spatula. After mixing, the solution retains its properties for 45 minutes, and the drying time is about 30 minutes. Tile with such a seam can be used after 3-4 days after application.2. MAPEI KERAPOXY2-C component acid-resistant epoxy grout for sealing gaps from 3 millimeters, which also fastens tile elements well. The product has high resistance to spots from fat, sauces, acids, aggressive chemicals, as well as to fungi and mold. It is appointed for grouting ceramic tiles, concrete, fibrobeton and other building materials. Ideal for finishing corridors, kitchen flooring and countertops, as well as tiles in the kitchen, in shower pallets and cabins.
Plus resistant to juices, fats and acids; moisture resistance; simplicity of application. Minusane detected.1. LITOKOL STARLIKEEEPOKOK SUPPORT OF UNIVERSAL APPLICATION From the Italian company Litokol. This product works simultaneously as a jet glue that does not flow from vertical surfaces as the filler of epoxy seams and as decorative plaster for the walls. This is one of the first epoxy rates with the protection against ultraviolet, making it prevents the gradual yellowing of the seams under the influence of UV radiation, Providing clear color and maintaining the technical and aesthetic properties of the seams even in difficult operating conditions. Suitable for horizontal and vertical surfaces in wet rooms.
Plusuniorism; high chemical and mechanical stability; after hardening - no cracks or dents; very easily cleaned. Minusna detected. Litokol Starlike
Acrylic Massage Difference from Cement Makeup, Acrylic Grout is not sold in the form of a dry mixture, and already immediately in the vendors, in the form of a ready-to-use mass, which is very convenient. Acrylic grouts have a consistency of dense paste, possess moisture-repellent properties and perfectly counteract the formation of fungus. Acryl grout is well suitable for plaster tiles. You can use it in kitchens, bathrooms, laundry, saunas, boiler rooms and other wet rooms. It works inside and outside the room, as well as on separate surfaces, such as plasterboard, insulated floors or facades. It is not recommended to be used in hard-to-reach places, for example, in the corners. It is also weakly resistant to temperature drops, so it should not be used in the open air. Izhsintez "Collection" Quality and very plastic acrylic grout. Easily applied, leaving a smooth and dense surface. Contains anti-grab elements - film fungicides and biocides, effectively opposing the formation of fungus and mold. Perfectly sticks and fastens tiles with each other. Fast dries and does not give cracks. The "Collection" is resistant to chemistry, protects well from the effects of moisture and temperature drops. The cost of 112 rubles.
Plusivity; quickly dries; already ready for use. Minusalesi do not have time to wash off surplus grouts from the tile - it will be difficult to tear it. Bolix FullColorGot to use acrylic mass from the Polish manufacturer. It is performed on the basis of aqueous dispersions and does not contain cement, selling already in the form of a finished mass. Therefore, you do not need to independently stir the material with water. It is used to apply ceramic cladding (glaze, terracotta, porcelain stoneware, mosaic) and glass mosaic on the walls and floors inside buildings and on vertical surfaces outside. Suitable for grinding gaps from 1 to 10 mm. It can be used in rooms subject to regular moisture, such as kitchens and bathrooms. Grout creates a very flexible seam, which allows it to be used on the grounds subject to deformation. The cost of 357 rubles.
Plus sell in the form of ready-made mass; water resistance; resistance to fungus and microorganisms. It is consistently found in the domestic market. Summies and recommendations When choosing a waist for the PLATEZATIK is a mandatory and final step of any tiled finish. To each specific type of tile, an individual grout type is applied, depending on the width of the seam, type and quality of tiles. The seams can mask irregularities and cover imperfect places, as well as protect the tile seams from the formation of cracks, thus playing both decorative and protective role: with the help of the grouting you can change the appearance of not only tiles, but also the entire interior of the room, so it is necessary to carefully approach It is very important for the color of the color of the glaze; from a technical point of view It is very important that the solution sticks to the tile, providing a constant mechanical, physical and chemical resistance of the entire surface; another important aspect when choosing a grout is its protective qualities in relation to moisture, exposure to ultraviolet rays , mold occurrence, as well as direct mechanical exposure. Quality data depend on the type and composition of the grout; modern grouts also have water-repellent properties, which is very important when used in wet premises. Potaging is made either in the form of a finished mass and sold in buckets, or in the form of a dry mix, which, when adding the amount recommended by the amount recommended by the manufacturer Water, turns into a solution. The composition of the mixture determines the texture and permissible width of the seam, as well as resistance to external factors. It is mainly there are one-component and two-component solutions that require mixing with an emulsion enriching them with elastic substances. Video - nuances when choosing grouts for tiles