How to make a simple induction slab 180 W

Anonim
How to make a simple induction slab 180 W 18712_1

In fact, the induction stove is an extremely simple device. Make a fully working prototype for even a novice radio amateur. Here is an excellent example for repetition: a simple scheme that does not contain in its composition neither microcircuits or kotrors. There are only two transistors and several other parts, allow you to build an induction slab with a heating power of 180 W.

Details that will be needed:

  • Transistors 2 pcs. IRFZ44N - http://alii.pub/5ct567.
  • Resistors 460 Ohm - 2 pcs, 10 com - 2 pcs - http://alii.pub/5h6ouv
  • Diodes UF4007- 2 pcs - http://ali.pub/5coyp6
  • Stabilians 10 V - 2 pcs - http://alii.pub/5myg53
  • Condenser 0.47 μF - http://alii.pub/5myg8z
  • LM7812 stabilizer microcircuit - http://alii.pub/5mygd9
  • Inductance 1000 μg - http://ali.pub/5Cozji

Scheme of induction plate

How to make a simple induction slab 180 W 18712_2

The scheme is classic for the simplest induction heaters with self-excitation.

Coil plate

How to make a simple induction slab 180 W 18712_3

The radiating coil of the plate is a "snail" wound up to the turn of a thick insulated wire of 1.5 sq.mm. and consists of 18 turns with a tap from the middle. The turns are not dispelled, glued to adhesive strips.

Production of induction plates with their own hands

The board was made to order. You can assemble the scheme by mounting, or on a versatile board.

How to make a simple induction slab 180 W 18712_4

We set all the details on the fee from the youngest.

How to make a simple induction slab 180 W 18712_5

And ending with inductance.

How to make a simple induction slab 180 W 18712_6

Separate and cut output.

How to make a simple induction slab 180 W 18712_7

We solder feed wires, weekend transistors set to small radiators.

How to make a simple induction slab 180 W 18712_8

We connect the radiating coil to the output of the board.

How to make a simple induction slab 180 W 18712_9

Let's supply power from a powerful block. When installed on the coil of metallic dishes, the current consumed current will increase significantly.

How to make a simple induction slab 180 W 18712_10

After 10 minutes, water will boil.

How to make a simple induction slab 180 W 18712_11

The power consumed by the stove is 180 W, which is consumed from: 10 and consumption current at 18 V. This power has a higher efficiency compared to heating elements, as it is easily concentrated in the right place and is not spent on heat loss.

Watch the video

Another option of a simple induction plate - https://sdelaysam-svoimirukami.ru/7031-kak-sdelat-prostuju-indukcionnuju-plitu-na-2-tranzistorah.html

Read more