The specialists of the Russian newspaper publication told about how to deal with m with snow piling.
Typically, the snow and ice cover the frame and the wiper brushes when the glass heats up. Some automakers set the heated areas of the brushes of the brushes or all the glass, but using such a function you can see that after some time it appears on the glass, which must be removed by a scraper or hands. Stopping in a dense traffick on the track or in snowfall can be dangerous, and therefore specialists of the RG advise to limit heat to the windshield or to submit cold air to the "lobovukha". Snow after this will stop quickly melting and the formation of the land will noticeably slow down.
Also, the problem with the formation of land can be solved by increasing the speed of movement. WG notes that if you find a route on which you can move at a speed of over 60 km / h, then the snow sticking will be able to minimize. Use the washing fluid to remove the land is not the best plan, because success is not guaranteed. The chance of success is the greater, the lower point of freezing in special safety. You can pour the glass directly from the canister, and not sprinkle from the nozzles - the effect will be more tangible. To defrost glass, you can use ethyl or isopropyl alcohol, as well as special equipment intended for defrosting, well, even a thin end of the glass can be even simple vodka. Also, experts remind that alcohol-containing fluids must be applied not only on the brushes, but also to the outstanding places of windshield.
Prevent snow sticking on brushes using silicone lubrication. It is worth removing the brushes from the car and put home, and after their drying, apply universal silicone lubricant to the frame and the rubber element. The main thing is not to overdo it and remove excess means from the rubber element, otherwise fat divorces will appear on the glass. You can also use WD-40 universal lubrication or other water-repellent lubricant, which must be applied to hinges and connections, and not to the gum themselves.
It is not necessary to use hot water for heating brushes and sleep, because hot water will instantly freeze and create even more problems. In the worst case, the "Lobovo" will burst from the temperature drop. Also, do not apply engine oil on the brushes, because it does not save from the land, and the fat traces will have to withdraw not one day.