Don da sauri da kuma a hankali Weld bututu, sanduna da sauran ƙarfe mirgine a wani kusurwa, ya dace sosai don amfani da matsa lamba. Yana riƙe da sassan strely, banda za a iya daidaita su don kusurwa daban-daban na docking. Tabbas wannan yana da amfani mai amfani ga welder, wanda ba shi da wahala a yi akan kanku.
Babban kayan:
- bututu 100 mm;
- Korner 50x50 mm;
- Bar 50 mm;
- Studs M16 - 2 inji mai kwakwalwa.;
- bolts M10, M16;
- Motsin al'ada da kwayoyi na yau da kullun, wanki M10, M16, M20.
Tsarin masana'antu na masana'antu don walda
Daga bututu da kuke buƙatar yanke aikin kayan aikin 7-10 cm tsayi. A cikin tsakiyar, a kan rabin da'irar, yana da fadi 16 mm.
Na gaba, kuna buƙatar shirya sassan 2 na kusurwa tare da tsawon bututu. Cibiyar ɗayan ɗayansu tana kama da kai tare da kai mai gudana.
An saka kusurwa tare da budurwa a cikin bututu. Daga ciki an sanya shi a kan goro m20 da iska M16.
Kuna buƙatar matsawa kusurwa zuwa gefen tsagi da matsa. Sannan na biyu ya maye gurbin shi, kuma ya welded zuwa bututu.
A sasanninta a kusurwoyi da dama suna walwalo tare da tsawon tsawon tsawon 15 cm. Yana da mahimmanci cewa ƙarfe ba ya nuna hali yayin da aka lura da waldi.
A mataki na gaba, 2 ya tsaya don matsawa matsa. A saboda wannan, ana yanke zobba 2 daga bututu 3/4 inch.
A kan ɓangarorinsu suna welds wedds. A gefe guda, ya zama dole a dafa a kan m puck, saboda haka shugaban m10 maƙaryaci yana wucewa ta.
Don ƙirar matsa da kuke buƙatar shirya 2 Pin M16. Daga gefe ɗaya ana auna su a gare su, ana iya amfani da kwayoyi m20 na.
M10 kwayoyi ake welded a karshen. Latterarshe suna jujjuyawa don garkuwa da ƙwayoyin da aka oba M16 akan studs.
An zana kusoshi na M10 na M10 zuwa studs.
Bayan haka kuna buƙatar waye su da kwayoyi elongated kwayoyi a kan sasanninta. A saboda wannan dalili, ana amfani da sararin samaniya daga sanda.
Bayan waldi, an fentin matsa.
Dole ne a shigar da kusancinta ta hannu daidai da aka sanya ido don kiyaye madaidaiciya kusurwa. Sannan a kan bututu an shirya tare da alamar wuka a gefuna. Bayan haka, ya kamata a motsa ta kusurwata a ƙarƙashin digiri 45, kuma sanya notches.
Mai da hankali kan lakabin, zai yuwu a saita matsa a kusurwar da ake so, da kuma ƙirar ƙirar ko wasu haya don walda a kanta. Sai dai ya juya mai amfani mai amfani mai amfani, bada izinin weld tsarin karfe.
