Idan kun saita madauwari madauwari wanda aka gani a kan karusai, motsi tare da jagora, to, cikakken ingantaccen na'ura za a samu. Irin wannan kayan aikin ya isa ya aiwatar da yankan kayan a cikin kayayyakin abinci don yin oda, kada a ambaci triples daban-daban. Kuna iya yin jagora daga kayan da aka fi dacewa daga Stroymag.
Babban kayan:
- Studs, kwayoyi, wanki m10;
- Kananan bikin - 8 inji mai kwakwalwa.;
- Karfe kauri 15-20 mm;
- Profile bututun :x30 mm;
- Korner 30x30 mm;
- Plywood 12 mm.
Tsarin sarrafa masana'antu don jagora ga manual saw
Don yin karusai don jagora, kuna buƙatar tattara rollers. Don yin wannan, a kan sashin diddige na diddige 2 ɗauke da kai, kamar yadda cikin misalin. Kuna buƙatar tattara samfuran 4.
Dole ne a haɗa rollers tare da yumpers daga tsiri. Distance tsakanin su ya kamata ya zama don saka wani bututun diagonal 30x30 mm.
Don ginin karusar, ana buƙatar shirya 2 a kusurwar kusurwar 30x30 mm 30 cm, da wasu kusurwa daga plywood daidai wannan, 10 cm, da kuma wasu kusurwa, plywood da kuma rollers, karkatar da juna a cikin rabin karusan. Muna buƙatar waɗannan cikakkun bayanai.
Biyayya guda biyu 33x13 cm ana yanke su daga plywood. Triangularkular kujerar don jagororin bayanin martaba ana yanke. Nisa tsakanin abubuwan yanka ya kamata su kasance irin wannan rabin karusar da aka sami damar ɗaukar madaukake.
Hakanan, tushe na na'ura 100x53 cm an yanke daga flywood. Daga gefuna, an saka wasu wurare 23.6 cm tare da tsawon 103.6 cm tare da halves na karusa. Latterarshen suna karkatar da juna tare da juna na kusurwa a cikin firam da aka gama.
Dangane da tsintsiyar t-mai siffa 4 don clamps. A cikin kowannensu, an saka farantin karfe 2 tare da sliced zaren ana saka. Studs suna letent cikin waɗannan harsasai, wanda aka sanya masu sa ido daga tsiri na kusa zai mai da ƙarfi.
Gaggawa tare da yankuna ana goge su a gefuna a gindi. A saboda wannan, ana amfani da jinginar gida daga kusurwa. Zuwa gefen gado yana buƙatar ɗaukar bututun shiriya.
Madauwari an sanya shi a kan karusa. Diski ya kamata ya zama mai tsananin layi zuwa injin. To, a kan propyl, gwargwadon abin da zai yiwu a daidaita aikin aikin lokacin da yake ƙyalli.
Ana cire tashoshin giciye daga babban mashaya. Za a goge shi tare da Stiletto zuwa faranti zuwa ga faranti a cikin tsagi na t-dimbin yawa. Ana amfani da layin tashar tashoshi a ciki, don sarrafa tsawon yankan. A lokacin da kanta, Hakanan kuna buƙatar gyara T-waƙa. Wannan zai ba ku damar shigar da katako na katako na katako.
A sakamakon haka, ko da kasafin kuɗi madauwari na Jaiku Stan ya juya ya zama inji mai daidai. Kudin samarwa ya rage kadan, kuma ainihin amfanin da aka samu ya kasance yana da wuya a wuce gona da iri.
Kalli bidiyon
Yadda ake yin tebur mai kyau don niƙa mai niƙa tare da mai saukarwa mai sauƙi - https @//sdewesam-molnyjsquift.html