From the streets of doorways and windows can be twisted with cement mortar. This finish is very cheap in terms of material costs, but allows you to simply transform the facade. Such work at first glance looks difficult, but you can cope with this forces if you act on a proven schema and properly mix the plaster.
What will take:
- Cement M400;
- Sandy sand;
- water;
- Rules or smooth wooden rails;
- trowel
- Smolder.
The process of framing openings by plaster
To work it is necessary to prepare a thick plaster. To do this, cement with sand in the proportion of 1: 3 is added. Everything is stirred in a dry form, then 0.5 parts of the water flows. As it is mixed, it is gradually added, while the density of the plaster will not be optimal.
To make the framing around the opening, you need to impose a thick layer of plaster on the required width. Adjust the thickness of the solution you need to attach rules or flat wooden rails. The latter are very well held on the plaster. You need to make sideways 2 rails on both sides of the framing line. Then the solution is thrown between them and is noted.
It is necessary to remove the plane between the beacons. Then the pure dry cement is rubbed into the plaster. It will strengthen the surface, make it more solid and resistant to moisture. She will be like concrete. Cement will immediately take the water from the plaster and becomes wet, so it can be easily confused. You can remove the perfect plane by spending a wide smoother with a loyal in the rake-beaches. For you, you need to withdraw the side surface of the framing. For this rail removal. One of them is applied to the clove with the edge of the face smooth side. Then the plaster, and then dry cement are applied on the sidewall and are not allowed.
After removing the planes, you need to smooth everything again, applying the rail so that the tool does not go into the plaster more required. In conclusion, you can make decorative grooves on the frame. For this, the rail is applied, and on it, the plaster is cut into the line with thin cells or other suitable tools.
Then you need to give the plaster dry. If necessary, it should be covered with direct sunlight.
After drying the framing, you can paint the facade paint. If there are flaws, they are easy to condably, when the solution will light slightly.
